Facilure bed selection knowledge - Maintenance and cleaning of fabric beds Classification of fabric beds According to the style, it can be divided into: modern style, American style, European style, pastoral style, etc. Fabric bed evaluation 1. Eval...
Facilure bed selection knowledge - Maintenance and cleaning of fabric beds
Classification of fabric beds
According to the style, it can be divided into: modern style, American style, European style, pastoral style, etc.
Fabric bed evaluation
1. Evaluate the specifications of the bed and purchase them according to the bedroom area.
2. Evaluate the frame of the bed to understand its firmness.
3. The style of the evaluation bed must be matched with the home environment. Maintenance and cleaning of fabric beds
Maintenance of fabric beds
1. The soaking time should not be too long during washing, no more than 30 minutes. Use gentle and neutral detergents, first let the washing dissolve in water, and then put it in bedding. Do not use bleach when washing, and the water temperature should not be too high, generally not higher than 40 degrees.
2. It is recommended to dry clean the newly purchased bedding. It should be washed after dry cleaning at least 3-4 times. Wash the bedding after a period of time, because chemical reagents will penetrate into dry cleaning, which will destroy the original structure of the fabric to a certain extent and is not environmentally friendly.
3. No matter which fabric bedding is purchased, you must read the label instructions before washing: the bedding for the change of seasons should be washed clean, dried and placed in a dry place, and the humid areas in the south should be dried regularly; a small amount of bed screen that cannot be removed and washed, it is recommended to use detergent to clean the fabric on the side of the bed; the quilt core and pillow core generally do not need to be washed, and pat it evenly for a period of time after drying.
4. The washed bedding should be properly ironed, and the ironing temperature generally does not exceed 140 degrees. When drying, do not expose the front of the bed sheets, quilt covers, etc. to the sun. The back of the bed should be facing outward and dried in a cool and ventilated place.
5. When washing dark bedding, do not rub it partially, and do not mix it with other light-colored fabrics to wash.
6. Precautions for use: Avoid sharp objects such as knife and scissors; do not expose them directly to the sun for a long time; do not allow flames, high-temperature objects, electric stoves, etc. to approach the soft bed.
Cleaning of fabric bed
1. Spray the cloth surface cleaner once first to prevent dirty oil and water from adsorbing, and has a dustproof effect. You can spray it once a month.
2. When cleaning, if there are stains, do not be stained with water. Special cleaning and maintenance products should be used. Wipe repeatedly on dirty places until stains are removed. Do not scrub with a lot of water to prevent water from seeping into the inner layer of the bed, causing moisture and deformation of the frame on the inner side of the bed, and easy to breed mold.
3. Since the material fibers of the fabric bed are prone to retain dust and dirt, you can first pat it with a dry towel to remove the dust, and then wipe the surface of the cloth with a towel or dust-free paper.
Clothing bed purchasing knowledge
1. Smell the smell:
Carefully smell the fabric and bed frame of the fabric bed. A well-made bed will not have an odor. If there is a pungent smell, don’t buy it.
2. Tie fabric:
Generally, there are linen and velvet cloth on the market, and the one with high knitting density is the best.
3. Look at the rib skeleton:
The general fabric bed only has two rows of rib skeletons, while good ones usually have three rows. The poplar skeleton is more tough and not easy to deform.
4. View the bed side:
You can knock hard on the bed side. If the sound is low and thick, the bed side will usually be a little stronger.
5. Check the interface:
Carefully observe the workmanship of the interface to see if there are any disconnections or damages.
6. Look at after-sales service:
The products sold by regular furniture companies pay great attention to after-sales service. When purchasing, you must ask the relevant after-sales questions clearly.
